OUR PRODUCTS
STRONG TILE
Highlights Reduce the need for grinding and polishing Keep the tile balance in the same horizontal position Improve tile installation speed, reduce installer fatigue or pressure
FIBRE CONCRETE SPACERS
FIBRE CONCRETE SPACER
High compressive, no deformation in heat or cold, the required concrete cover accurately retain. The spacers remain in position during formwork erection and concreting. Extremely suitable for impermeable concrete, no hairline cracks between the spacers and the concrete.
BINDING WIRE
Galvanized BINDING Wire is great for multi functional purposes. Use in DIY projects anywhere in the workhouse, garden, or farm. Use for bailing, tying or fencing. Designed to be malleable this wire is easy to use. Available in 16 gauge and 20 gauge sizes, choose the one that best suits your needs.
PVC SPACERS AND MATERIALS
NORMFIX TYPE FLOORING PLASTIC ANTIRUST MARGIN COMPONENTS
They may easily be used at radial foundations and flooring steel with heavy outfits. They do not overturn owing to the large sitting space. The strength is beyond dispute.
PVC PIPE
There are pipes ensuring to keep tie-rots used to strengthen reinforced concrete curtains- column and beam from untouched with the concrete, to dismantle them easily and to keep distances between the forms fixed. Manufactured from hard polyethylene (PE) and unbreakable. Standard length is 3m.
CLAMPFIX TYPE PLASTIC ANTIRUST MARGIN COMPONENTS
They are suitable to ensure anti-rust margin between the horizontal space of the form and construction components like flooring and beams. Type of convenient to max and min anti rust margin heights. They hold steels of all diameters easily and securely. They are components with high carrying power and stable.
MINIFIX WHEEL SPACER ANTIRUST MARGIN COMPONENTS
They have large ranges of use. They were used for long years successfully. There are available types for steel of all diameters. Additional width given to anti-rust margin where the steel fits prevents it to be over turned. Due to its cage-like structure they do not prevent concrete flow. Due to processes at outer side they contact the form very slightly so give a good finishing.
PILE CAGE ANTIRUST MARGIN COMPONENT/ROOF TILE SPACER
Pile cage spacer are using to cast reinforced concrete piles and improve floor, Steel outfits are prepared suitable to pile hole which before pierced to floor. When the steel outfits is lifting down with helping the crab and the same stirrup also putting down with minimum 4-5 pieces and one each distance, pile cage spacers facilitate to make a guide duty, it provide into ground of steel outfits and also maintain the correct cover when the concrete is poured or pumped.
ROOF TILE SPACER
It provide equal height and joint the erection of square tiles laid over ins insulting materials at open roofs to protect them against conditions of the nature.
SAFETY REBAR CAP
It is used as safety plug by attaching to extremities in reinforcement concrete building construction to avoid work accident. It is made from polypropylene in orange color to have attention.
PVC SHIMPAD
They are used in erection of aluminum, plastic and wooden carpentry works to bring them in balance. They are grooved against sliding.
Strong angle valve
High quality stainless steel material, safe and non-toxic, sturdy and durable. The water tap is shiny, fashionable, and corrosion-resistant. The G1/2 thread is suitable for all of the user. Reusable and durable: it can be used repeatedly and durable for long time use. Easy installation: easy to install the water tap, and it is anti-rust, and keep your water tap steady and stable.
PVC CONE
It is the hup preventing cement group to leak into the case pipe used to keep distance between the fixed forms. It may either be closed with special plug or maybe taken for resed at the end of the work.
BACK-UP ROD
CONSTRUCTION FORMWORK
TIE ROD
Even if there are unforgivable element providing required connection between panels at both side of curtain-columns and beams forms, they take place at various applications according to the requirement of forms and desire of uses. Due to it's special structure with worm screw wringing and to dismantling operations are very quick. There are less disturbed then environmental contamination such as cement grout in comparison with standard tie rod, they are easy to care and have longer lifetime.
WATER STOP ADAPTOR
At sub-aqueous works, special type of Tie-Rods is fitted to two extremities of water stop element and supporting of form is thus insured. There is protective pipe around the Tie-Rod in the form. After pouting the concrete the Tie-Rod are taken apart, the remaining empty volumes are filled with special mortar. It is made of spheroid zed cast iron. t is solid materials with full interior and exterior grooved of flange.
WING NUT
It is made of spheroid zed cast iron. It is easy and safe to use. Mostly it doesn't require even a key for fitting and dismantling. Owing to its special design, a proper size hummer or steel bar will be enough for this purpose.
WASHER PLATE
These are pipes ensuring to keep Tie-Rod used to strengthen reinforced concrete curtains-column and beams forms untouched with the concrete to dismantle them easily and to keep distance between the fixed forms, manufactured from high polypropylene (PE) and unbreakable.
BACK-UP ROD
Used as filler for decoration purposes, Used as an expansion joint filler for precast, steel and concrete projects.
TILE LEVELING PRODUCTS
BATHROOM BIDET
NON-ELECTRICAL BIDET TOILET ATTACHMENT
Natural Water Non-electrical Bidet Toilet Attachment, Two Nozzles for WASH & BIDET, Nozzle. Cleaning, with one touch pressure control, Newest Life Style for Bathroom Bidet! Hygienic chrome coating Nozzle! Excellent Design, Easy to install on normal toilet stool, Non-Electrical type, Easy installation at any toilet, Energy-saving type Non- electric Bidets, It requires no electricity and powered by using only water pressure, It is the most economical and environmentally friendly Bidet and it is easily installed onto your existing toilet seat for an effect and hygienic clean, The new creative design of BIDET breaks the existing design pattern of bidet, It stands out very vividly from other bidets and improves the class of bathroom.
NON-ELECTRICAL BIDET TOILET ATTACHMENT
Natural Water Non-electrical Bidet Toilet Attachment, Two Nozzles for WASH & BIDET, Nozzle. Cleaning, with one touch pressure control, Newest Life Style for Bathroom Bidet! Hygienic chrome coating Nozzle! Excellent Design, Easy to install on normal toilet stool, Non-Electrical type, Easy installation at any toilet, Energy-saving type Non- electric Bidets, It requires no electricity and powered by using only water pressure, It is the most economical and environmentally friendly Bidet and it is easily installed onto your existing toilet seat for an effect and hygienic clean, The new creative design of BIDET breaks the existing design pattern of bidet, It stands out very vividly from other bidets and improves the class of bathroom.
3D PANELS
Mywall3D decorative wall panels are manufactured with the use of an advanced technology that causes high‐density (39 kg/m3) polystyrene to foam. This technology allows us this allows us to produce panels with a smooth texture and the required surface hardness. The dimensions of the panels are 600 x 600 mm. The depth of the decorative parts ranges from 27 to 30 mm, depending on the shape.